Mitsubishi Electric FX5-DP-M User Manual page 58

Verify
Uploads setting details stored in the CPU module and the SD memory card of the CPU module and verifies them against the
current setting details of a project.
Operating procedure
1.
Select "Verify" in "Online Tasks".
2.
Select the drive containing the setting details to be verified against the setting details of the current project in "Location"
of the "Location of configuration image" window.
Item Description
Location Select the drive containing the setting details to be verified against the setting details of the current
project.
The following items are displayed even when the corresponding setting details do not store in the
drive.
• CPU Standard ROM: The memory of the CPU module
• Card SD RAM: The SD memory card inserted in the CPU module
3.
Displays the results of the verification between the configuration image file stored in the drive selected of the "Location of
configuration image" window and the configuration image file created from the current project.
Precautions
The refresh settings are not verified.
Start/Stop PROFIBUS
This item is used to manually start or stop data exchange with DP-Slaves.
• If the PROFIBUS-DP module is not exchanging data: Data exchange starts.
• If the PROFIBUS-DP module is exchanging data: Data exchange stops.
For "Start/Stop PROFIBUS", Data exchange is started or stopped by turning on and off 'Data exchange start
request signal' (Un\G2.b0).
Starting/stopping of data exchange may fail if "Start/Stop PROFIBUS" is executed while the program is
running.
8 PROFIBUS Configuration Tool
56
8.2 "PROFIBUS Configurator Tasks" Window
Setting range
• CPU Standard ROM
• Card SD RAM
(Default: CPU Standard ROM)