Mitsubishi Electric FX5-DP-M User Manual page 61

■Add Slave to Project
Operating procedure
1.
Perform any of the operations described below to add the DP-Slave to a project.
• Right-click the DP-Slave to be added to the project, and select "Add Slave to Project".
• Double-click the DP-Slave to be added to the project.
• Drag and drop the DP-Slave to be added to the project from the [Global GSD Database] tab to the "PROFIBUS Network"
window.
2.
The "Slave Settings" window is displayed. ( Page 87 Slave Settings)
3.
When DP-Slave is set in the "Slave Settings" window, the DP-Slave is added to the "PROFIBUS Network" window, and
the information on that DP-Slave is copied to the project file. The information on the DP-Slave that is copied to the
project file can be checked in the [Project GSD Database] tab.
The DP-Slave information can be added or edited even when the project is opened on another personal computer because
that information was copied to the project file.
When the project file contains the DP-Slave information of the selected type, the project file information is not changed.
When the DP-Slave having a smaller FDL address than that of the existing DP-Slave is added, the buffer
memory is re-assigned.
• When the parameter is changed, review the program and the refresh settings. ( Page 86 CPU Device
Access)
• If the refresh settings are enabled, update the PROFIBUS labels again. ( Page 66 Update PROFIBUS
Label)
■Add GSD File
Operating procedure
1.
Open the file to be added.
[Global GSD Database] tab  Right-click  [Add GSD File]
2.
The GSD file is analyzed and added to the GSD database.
When the GSD file refers to slave device images, PROFIBUS Configuration Tool automatically reads the images and saves
them to the GSD database.
When applicable files do not exist, the default image is used alternatively. The image can be replaced with that unique to the
device later. ( Page 60 Properties)
8 PROFIBUS Configuration Tool
8.2 "PROFIBUS Configurator Tasks" Window
8
59