Checking The Software Version - Mitsubishi Electric FX5-DP-M User Manual

Item
Process Alarm
Pull/Plug Alarm
Allow max. one alarm of each type
8.4

Checking the Software Version

Check the software version of PROFIBUS Configuration Tool in the following window of PROFIBUS Configuration Tool.
[Version]  [About PROFIBUS Configuration Tool]
Description
Check this box to allow Process Alarm to be sent.
This item can be set when the DP-Slave supports this function.
This item is fixed to "Checked" depending on the DP-Slave used.
• Not checked: Prohibits sending of Process Alarm.
• Checked: Allows sending of Process Alarm.
Check this box to allow Pull/Plug Alarm to be sent.
This item can be set when the DP-Slave supports this function.
This item is fixed to "Checked" depending on the DP-Slave used.
• Not checked: Prohibits sending of Pull/Plug Alarm.
• Checked: Allows sending of Pull/Plug Alarm.
Check this box to acquire alarms of each type one by one when the DP-Slave detects multiple types of alarms.
This item can be set when the DP-Slave supports this function.
This item is fixed to "Checked" depending on the DP-Slave used.
• Not checked: Acquires alarms in chronological order (maximum eight alarms).
• Checked: Acquires alarms of each type one by one (maximum six alarms).
8 PROFIBUS Configuration Tool
8.4 Checking the Software Version
8
93