Mitsubishi Electric FX5-DP-M User Manual page 77

Documentation of I/O-Mapping
This item is used to display the setting details of I/O Mapping on the Web browser.
The setting details can be printed or saved in HTML files using the corresponding function of the Web browser.
"Buffer MIT-Address" displays the CPU module device for the transfer source and transfer destination
assigned to "CPU Device Access" in the "Master settings" window. ( Page 86 CPU Device Access)
• When a bit device is assigned to the transfer buffer, the "Buffer MIT-Address" column for the bit device is left
blank because I/O Mapping does not support the bit device.
• The "Buffer MIT-Address" column of the bit device is blank even when the refresh settings are disabled.
Check that the buffer memory areas are assigned as 'Address information area' (Un\G22528 to
Un\G22655), 'Input data start address area' (Un\G22784 to Un\G22847), and 'Output data start address
area' (Un\G22912 to Un\G22975).
8 PROFIBUS Configuration Tool
8.2 "PROFIBUS Configurator Tasks" Window
8
75