Mitsubishi Electric FX5-DP-M User Manual page 63

2.
Change the settings and click the [OK] button. The information in the GSD database is changed.
Item
Vendor
Revision
Ident-No.
GSD-/DDB-File
Bitmap
[Replace Bitmap] button
Bitmap-File
Slave Family
Set Byte Order for User
*2
Parameter
*1 The image set for "Normal" is displayed in the [Global GSD Database] tab and the [Project GSD Database] tab.
The image set for "Diagnostics" or "Special Function" is not displayed.
*2 This item changes the byte order of user parameters.
To change the byte order of I/O data, use the slave parameter. ( Page 87 Slave Settings)
*3 For the byte order of newly added DP-Slaves, contact the manufacturer of each DP-Slaves.
Improper change may cause malfunction or damage of the module.
Description
Displays the manufacturer of the DP-Slave.
Displays the version of the GSD file of the DP-Slave or the version of the device.
Displays the Ident No. of the DP-Slave in hexadecimal.
Displays the name of the GSD file of the DP-Slave.
Displays or changes the image registered in the GSD database.
*1
• Normal : The image for normal operation is displayed.
*1
• Diagnostics : The image for diagnostics is displayed.
*1
• Special Function : The image for special function is displayed.
Changes the image registered in the GSD database.
Click this button to display the image data selection window.
The specifications of images that can be registered are as follows. Other images cannot be displayed properly.
• Height  width: 40 pixels 70 pixels
• Colors: 16 colors
• Extension: .bmp or .dib
Displays the image name.
Selects the group of the module to be displayed in the [Global GSD Database] tab.
Changes the byte order (big-endian or little-endian) of user parameters set for the DP-Slave.
• Low byte first ('Little Endean'/Intel): Little-endian
• High byte first ('Big Endean'/Motorola): Big-endian
*3
8 PROFIBUS Configuration Tool
8.2 "PROFIBUS Configurator Tasks" Window
8
61