Mitsubishi Electric FX5-DP-M User Manual page 129

Address Address
(Decimal) (hexadecimal)
23200 to 23327 5AA0H to 5B1FH
23328 to 23454 5B20H to 5B9EH
23455 5B9FH
23456 5BA0H
23457 to 23583 5BA1H to 5C1FH
23584 to 23587 5C20H to 5C23H
23588 to 23591 5C24H to 5C27H
23592 to 23595 5C28H to 5C2BH
23596 to 23599 5C2CH to 5C2FH
23600 to 23603 5C30H to 5C33H
23604 to 23607 5C34H to 5C37H
23608 to 23611 5C38H to 5C3BH
23612 to 23807 5C3CH to 5CFFH
23808 5D00H
23809 to 24832 5D01H to 6100H
24833 to 25119 6101H to 621FH
25120 6220H
25121 to 26144 6221H to 6620H
26145 to 26415 6621H to 672FH
26416 to 26420 6730H to 6734H
26421 to 26431 6735H to 673FH
26432 to 26434 6740H to 6742H
26435 to 26445 6743H to 674DH
26446 to 26768 674EH to 6890H
26769 to 65535 6891H to FFFFH
*1 The initial value changes depending on the CPU module mounting the FX5-DP-M or the relevant parameter(s).
Do not write data to "System area". Doing so may cause malfunction of the programmable controller system.
Name
System area
Extended diagnostic information
area
System area
Extended diagnostic information
read request area
Extended diagnostic information
read response area
Parameter setting status area
(Active station)
System area
Parameter setting status area
(Reserved station)
System area
Temporarily reserved station
specification status area
System area
Temporarily reserved station
specification request area
System area
Acyclic communication request
execution instruction area
Acyclic communication request area
System area
Acyclic communication request
result area
Acyclic communication response
area
System area
Slave status area (Alarm detection)
System area
Alarm request area
System area
Alarm response area
System area
Description
Stores the latest extended diagnostic information on
DP-Slaves generated during communications.
Sets the FDL address from which extended
diagnostic information is acquired.
Stores the result of the extended diagnostic
information read request.
Stores the DP-Slave set as normal DP-Slaves by
slave parameters.
Stores the DP-Slaves set as reserved stations by the
slave parameter.
Stores the DP-Slaves specified as a temporarily
reserved station by the temporarily reserved station
specification function.
Sets which DP-Slaves are to be specified as
temporarily reserved stations by the temporarily
reserved station specification function.
Turn on bits of Acyclic communication function that
are relevant to the request instruction numbers to
execute.
Write the request instruction data to be executed by
the Acyclic communication function.
Turns the appropriate bits on for the request
acceptance status and the execution completed
status of the Acyclic communication.
Stores the request execution results of the Acyclic
communication function.
Stores the alarm status of DP-Slaves.
Sets alarm acquisition request data.
Stores the result of alarm acquisition.
Initial Read,
value write
0 Read
FFFFH Read,
write
0 Read
0 Read
0 Read
0 Read
0 Read,
write
0 Read,
write
0 Read,
write
0 Read
0 Read
0 Read
0 Read,
write
0 Read
APPX
Appendix 3 Buffer Memory
A
127