Inserting Other Modules - Festo CPX-FB39 Description

3 Commissioning
3.6.5

Inserting other modules

Please Note
Requirements for execution of the subsequent steps:
– Codesys project set up with programmable controller (PLC)
– Device description files (SDDML files) available in Codesys
(è 3.6.2 Installing device description files (SDDML files))
– Field bus inserted in project (è 3.6.3 Inserting field bus)
– Bus node inserted in project (è 3.6.4 Insert bus node).
Procedure
1. Highlight bus node gateway entry (upper entry) in the device window ("Device window").
2. Project menu ("Project") > Add device... ("Add Device...").
The "Add Device"dialog opens up.
Fig. 3.16
3. Highlight the module.
4. Press the "Add Device"button.
5. Insert other modules in accordance with steps 3. and 4.
Expansion of the CPX terminal is now available in the Codesys project and assignment of
the inputs and outputs to variables in the higher-level controller (I/O mapping) is now
possible (è 3.6.6 I/O assignment).
Festo – P.BE-CPX-FB39-EN – 1504NH – English 47