Analogue Modules - Festo CPX-FB39 Description

3 Commissioning
3.4.3

Analogue modules

FG S-0-1504.SI.0 (Analog Output)
Module designation
Analog module (2 outputs)
Proportional pressure regulator VPPM-...TA-L-1-F...
1) Module identifier in the operator unit or in the hardware configuration of the programming software.
2) Input data è FG S-0-1505.SI.0 (analog input)
Tab. 3.4
FG S-0-1505.SI.0 (Analog Input)
Module designation
Pressure sensors
Proportional pressure regulator VPPM-...TA-L-1-F...
Analogue module
2 inputs
4 inputs
4 inputs
4 inputs (temperature module
for RTD sensors)
4 inputs (temperature module
for TC sensors)
4 inputs (pressure sensor
module 0 ... 10 bar)
4 inputs (pressure sensor
module –1 ... 1 bar)
1) Module identifier in the operator unit or in the hardware configuration of the programming software.
2) Output data è FG S-0-1504.SI.0 (analog output)
3) Depending on the configuration.
Tab. 3.5
The address assignment within the individual CPX analogue I/O modules can be found in
the description for the analogue I/O modules (è P.BE-CPX-AX-...).
Festo – P.BE-CPX-FB39-EN – 1504NH – English
Module type
CPX-2AA-U-I
Module type
VMPA-FB-PS-...
CPX-2AE-U-I
CPX-4AE-U-I
CPX-4AE-I
CPX-4AE-T
CPX-4AE-TC
CPX-4AE-P-D10
CPX-4AE-P-B2
Module Allocated address space
1)
identifiers Inputs
2AO –
VPPM 1x 16 bit
Module Allocated address space
1)
identifiers Inputs
MPA-P 1x 16 bit
VPPM 1x 16 bit
2AI 2x 16 Bit
4AI 4x 16 bit
4AI-I 4x 16 bit
4AI-T 2x 16 Bit
4x 16 bit
4AI-TC 4x 16 bit
4AI-P-D10 4x 16 bit
4AI-P-B2 4x 16 bit
Outputs
2x 16 Bit
2)
1x 16 bit
Outputs
–
2)
1x 16 bit
–
–
–
–
3)
–
–
–
31