Inserting Field Bus - Festo CPX-FB39 Description

3 Commissioning
3.6.3

Inserting field bus

Please Note
Requirements for execution of the subsequent steps:
– Codesys project set up with programmable controller (PLC)
– Device description files (SDDML files) available in Codesys
(è 3.6.2 Installing device description files (SDDML files)).
Procedure
1. Highlight entry of device in device window ("Device window").
2. Project menu ("Project") > Add device... ("Add Device...").
The "Add Device"dialog opens up.
Fig. 3.11
3. Extend the "sercos"entry and highlight the "sercos Master"entry.
4. Press the "Add Device"button.
The "sercos Master"entry appears in the device window ("Device window").
The Sercos master is now available as field bus in the Codesys project and the bus node
can be added to the device tree (è 3.6.4 Insert bus node).
42 Festo – P.BE-CPX-FB39-EN – 1504NH – English