Technology Modules - Festo CPX-FB39 Description

3 Commissioning
3.4.4

Technology modules

FG S-0-1507.SI.0 (Complex Protocol)
Module designation
INPUT/OUTPUT MODULE
Axis controller
Control block
(multi-axis interface)
End-position controller
Control block
(FHPP interface)
Measuring module
1) Module identifier in the operator unit or in the hardware configuration of the programming software.
Tab. 3.6
FG S-0-1508.SI.0 (Sub bus Master)
Module designation
Electrical interface
(CP interface)
Electrical interface
with setting:
0E/0A byte
0E/8A byte
0E/16A byte
0E/24A byte
0E/32A byte
8E/0A byte
16E/0A byte
24E/0A byte
32E/0A byte
8E/8A byte
16E/16A byte
24E/24A byte
32E/32A byte
1) Module identifier in the operator unit or in the hardware configuration of the programming software.
2) Maximum assigned address space is dependent on the string allocation
32
Module type
CPX-2ZE2DA
CPX-CMAX-C1-1
CPX-CMXX
CPX-CMPX-C-1-H1
CPX-CM-HPP
CPX-CMIX-CM-M1-1
Module type
CPX-CP-4-FB
CPX-CTEL-4-M12-5POL
Module Allocated address space
1)
identifiers Inputs
2CI2DO 3x 32 bit
CMAX-C1-C 8x 8bit
CMXX 8x 16 bit
CMPX-C-1 6x 8 bit
CM-HPP 32x 8 bit
CMIX 3x 16 bit
Module Allocated address space
1)
identifiers Inputs
CPI maximum
16x 8 bit
CTEL
–
–
–
–
–
8x 8bit
16x 8 bit
24x 8 bit
32x 8 bit
8x 8bit
16x 8 bit
24x 8 bit
32x 8 bit
Festo – P.BE-CPX-FB39-EN – 1504NH – English
Outputs
3x 32 bit
8x 8 bit
8x 16 bit
6x 8 bit
32x 8 bit
3x 16 bit
Outputs
maximum
2) 2)
16x 8 bit
–
8x 8bit
16x 8 bit
24x 8 bit
32x 8 bit
–
–
–
–
8x 8bit
16x 8 bit
24x 8 bit
32x 8 bit