Symbols; Structure Of Notices - RMG TME400-VMF Operating Manual

MessEG Measurement and Calibration Act
Law on the marketing and provision of measuring devices in the
market, their use and calibration, valid since 1/1/2015
MessEV Measurement and Calibration Regulation
Regulation on the marketing and provision of measuring devices in
the market and on their use and calibration; 12/11/2014
MID Measurement Instruments Directive
PTB Physikalisch-Technische Bundesanstalt
[German National Test Authority]
Vo original meter reading (Volume) of a mechanical counter
approx. approximately
max. maximum
min. minimum

Symbols

1.2.2.
The following symbols are used:
1, 2, ...
Identifies steps for work tasks
..

Structure of notices

1.2.3.
The following notices are used:
Danger
This warning notice informs you of imminently threatening dangers that can
arise due to misuse/operator error. If these situations are not avoided, death
or severe injuries can occur.
Manual TME400-VMF · EN02 · 2018 September 6th
1 Introduction
3