Purpose Of The Manual; Abbreviations - RMG TME400-VMF Operating Manual

1 Introduction

1.2. Purpose of the manual

This manual provides information that is necessary for fault-free and safe operation.
The TME400 was designed and produced according to the state of the art and gen-
erally recognized safety standards and directives. However, its use can entail dan-
2
gers that are avoidable by complying with this manual. The device must only be used
as intended and in technically sound condition.
Warning
Unintended use voids all warranty claims and the TME400 can also lose its
approvals.
1.2.1.
The following abbreviations are used:
TME400-VM
TME400-VMF
TME400-VC
TME400-VCF
Note
This manual only describes the TME400-VM and TME400-VMF.
Manual TME400-VMF · EN02 · 2018 September 6th

Abbreviations

The TME400-VM is a turbine meter which is used for non-
custody-transfer volume measurement (Volume Measurement) of
the operating volume of non-aggressive gases and combustion
fuels is used.
The TME400-VMF is a turbine gas meter that is used in custody-
transfer applications (Fiscally). The designation TME400-VMF
comprises all turbine meters.
The TME400-VC also enables calculation of the standard volume
flow (Volume Corrector) from the operating volume flow in non-
custody-transfer applications.
The TME400-VCF is used in custody-transfer applications (Fiscal-
ly). In addition to the turbine meter, the TME400-VCF designation
also includes the volume corrector.