Applicability Of The Manual; Danger During Operation; Dangers Of Operation In Ex Areas - RMG TME400-VM VMF Series Operating Manual

1 Introduction
1.2.6.
This manual describes the TME400. TME400 is generally only part of a complete
system. The manuals of the other components of the system must be observed. If
you find contradictory instructions, contact RMG and/or the manufacturers of the
other components.
12
Note
Ensure that the power data of the current connection matches the specifica-
tions on the type plate. Ensure that the limit values specified in the conform-
ity certificate (see appendix) for the devices to be connected are not ex-
ceeded.
Observe any applicable national regulations in the country of use. Use cable
that is appropriate for the cable fittings.
Danger
Only work on the equipment if you have the appropriate training and qualifi-
cations.
Attention: Risk of destruction due to body electricity, e.g. due to the rubbing
of clothing.
1.2.6.1.
Observe the specifications of the system manufacturer and/or system operator.
1.2.6.2.
Only operate the device in fault-free and complete condition.
If you make technical changes to the device, safe operation can no longer be guaran-
teed.
Danger
Only use the device in its original condition. The TME400 is permitted for op-
eration in Ex Protection Zone 1, but only within the permissible temperature
range (chapter 1.3.4.2 Temperature ranges).
Manual TME400-VMF · EN07 · December, 7

Applicability of the manual

Danger during operation

Dangers of operation in EX areas

th
2020