3 TME400
3.1.1.
The display test is provided to ensure that all fields of the display function properly.
For this purpose, please press and hold the up arrow and down arrow buttons (
and
tons are held.
42
3.1.2.
To reset the system, the voltage supply is interrupted and the TME400 is switched off
for this period. For this purpose, the battery and any existing external voltage supply
are disconnected. The program and operating parameters are not lost in the process
and the meter statuses are saved.
3.1.3.
It may be necessary to re-boot the device in case of severe faults.
Manual TME400-VMF · EN02 · 2018 September 6th
Display test
) for more than 2 seconds. The following display appears while these but-
Figure 6: Display at display test
Reset
Booting up