Komatsu Galeo PC138US-8 Shop Manual page 910

SEN02715-00
a When positioning front window glass
(5), set its horizontal and vertical posi-
tions as shown below.
Part (m) (Right side): Project by "3.8
Part (o) (Upper side): Retract by "3.0
6. Apply adhesive.
a Use either of the 2 types of the adhesive.
2
Adhesive (Summer):
2
Adhesive (Winter):
a The using limit of the adhesive is 4 months
after the date of manufacture. Do not use
the adhesive after this limit.
a Keep the adhesive in a dark place where
the temperaure is below 25°C.
a Never heat the adhesive higher than 30°C.
a When reusing the adhesive, remove the
all hardened part from the nozzle tip.
10
mm" from the
frame end.
mm" from the
frame end.
SUNSTAR PENGUINE
SEAL 580 SUPER "S"
SUNSTAR PENGUINE
SEAL 580 SUPER "W"
50 Disassembly and assembly
1) Break aluminum seal (13) of the outlet of
adhesive cartridge (12) and install the
nozzle.
2) Cut the tip of the adhesive nozzle (14) so
that dimension (q) and r will be as follows.
Dimension (q): 10 mm
q
Dimension (r) : 15 mm
q
3) Set adhesive cartridge (12) to caulking
gun [7].
a An electric caulking gun is more effi-
cient.
PC138US, USLC-8