Komatsu Galeo PC138US-8 Shop Manual page 907

50 Disassembly and assembly
3) Evenly apply paint primer to the surfaces
to stick both-sided adhesive tapes and the
surfaces out of those surfaces on opera-
tor's cab (8) which will be coated with the
adhesive.
2
Paint primer:
a Do not apply the primer more than 2
times. (If it is applied more than 2
times, its performance will be low-
ered.)
a Parts to be coated with primer: Apply
the primer all over dimension (a).
Dimension to apply primer (a): 25 mm
q
PC138US, USLC-8
SUNSTAR PAINT PRIMER
580 SUPER or equivalant
a As for right side window glass (1),
apply the primer to only the periphery
of the glass to stick the both-sided
adhesive tapes and the areas out of it
to apply the adhesive.
Part (b)
q
a After applying the primer, leave it for
at least 5 minutes (within 8 hours) to
dry.
a Never apply wring primer. If the glass
primer is applied by mistake, wipe it
off with white gasoline.
4) Evenly apply glass primer to the sticking
surfaces of window glass (9).
2
Glass primer:
SUNSTAR GLASS PRIMER
580 SUPER or equivalant
a Do not apply the primer more than 2
times. (If it is applied more than 2
times, its performance will be low-
ered.)
SEN02715-00
7