Komatsu Galeo PC138US-8 Shop Manual page 386

SEN02459-00
t t t t
Ordinary functions and special functions of machine monitor
The machine monitor has the ordinary function and special functions and displays information of various
types on the multi-display.
Some items are displayed automatically according to the internal setting of the machine monitor and the oth-
ers are displayed according to the operation of the switches.
1. Ordinary functions: Operator mode
The items in this mode are displayed ordinarily. The operator can display and set them by operating the
switches (Display and setting of some items need special operations of the switches).
2. Special functions: Service mode
The items in this mode are not displayed ordinarily. Each serviceman can display them by operating the
switches specially. This mode is used for special setting, testing, adjusting, or troubleshooting.
t Operator mode (Outline)
A Display of KOMATSU logo
A Display of inputting password
A Display of check before starting
A Display of warning after check before starting
A Display of ending of maintenance interval
A Display of check of working mode and travel speed
A Display of ordinary screen
A Display of end screen
B Selection of auto-deceleration
B Selection of working mode
B Selection of travel speed
B Operation to stop alarm buzzer
B Operation of windshield wiper
B Operation of window washer
B Operation of air conditioner/heater
B Operation to display camera mode
B Operation to display clock and service meter
B Check of maintenance information
Setting and display of user mode
B
(Including KOMTRAX messages for user)
C Display of energy-saving guidance
C Display of caution monitor
C Display of user code and failure code
O (Special operation)
Function of checking display of LCD
D
(Liquid Crystal Display)
D Function of checking service meter
Function of changing attachment/maintenance
D
password
4
Page
6p
6p Monitoring
7p Mechanical Systems
Abnormality
7p Electrical Systems
Record
7p Air-conditioning System
7p Maintenance Record
8p Maintenance Mode Change
8p Phone Number Entry
8p Key-on Mode
8p Unit
9p With/Without Attachment
Default
10p Attachment/Maintenance Password
10p Camera
10p ECO Display
10p Pump Absorption Torque
Adjustment
11p Attachment Flow Adjustment
11p Cylinder Cut-Out
12p No Injection
12p Fuel Consumption
Terminal Status
13p
GPS & Communication Status
KOMTRAX
14p
Settings
MODEM S/N (TH300)
14p
MODEM IP Address (TH200/201)
14p
Display of KOMTRAX message
16p
16p
17p
30 Testing and adjusting
Service mode
PC138US, USLC-8
Page
19p
20p
25p
26p
32p
33p
34p
36p
37p
38p
39p
40p
41p
42p
43p
44p
45p
46p
48p
49p
50p
51p
52p
53p