Komatsu Galeo PC138US-8 Shop Manual page 418

SEN02459-00
Phone Number Entry
The telephone No. displayed when the user code/
failure code is displayed in the operator mode can
be input and changed according to the following
procedure.
If a telephone No. is not input with this function, no
telephone No. is displayed in the operator mode.
1. Selecting menu
Select "Phone Number Entry" on the "Service
Menu" screen.
2. Registering and changing telephone No.
After the "Phone Number Entry" screen is dis-
played, register or change the telephone No.
[F2]: Reset all input No.
q
[F3]: Move to left position (if not blank)
q
[F4]: Move to right position (if not blank)
q
[F5]: Reset input digit/Return to service
q
menu
[F6]: Confirm input
q
a Up to 14 digits can be input from the left.
Input nothing in the surplus positions.
a If one of the input digits is wrong, move to
that digit (orange background) and over-
write it with the correct digit.
36
30 Testing and adjusting
a If [F6] is pressed without inputting a digit,
there is not information of telephone No.
Accordingly, no telephone No. is displayed
in the operator mode.
PC138US, USLC-8