Komatsu Galeo PC138US-8 Shop Manual page 390

SEN02459-00
Display of check of working mode and travel
speed
If the check before starting is finished normally, the
screen to check the working mode and travel speed
is displayed for 2 seconds.
a After display of check of the working mode and
travel speed is finished, the screen changes to
"Display of ordinary screen".
Display of ordinary screen
If the machine monitor starts normally, the ordinary
screen is displayed.
a Service meter (a) or a clock is displayed at the
center upper section of the screen (The ser-
vice meter or clock is selected with [F4]).
a ECO gauge (b) is displayed at the right end of
the screen (It is turned ON and OFF in the ser-
vice mode).
8
Display of end screen
When the starting switch is turned OFF, the end
screen is displayed for 5 seconds.
a Another message may be displayed on the
end screen, depending on the message dis-
play function of KOMTRAX.
Selection of auto-deceleration
While the ordinary screen is displayed, if the auto-
deceleration switch is pressed, large auto-deceler-
ation monitor (a) is displayed for 2 seconds and the
setting of the auto-deceleration is changed.
a Each time the auto-deceleration switch is
pressed, the auto-deceleration is turned ON
and OFF alternately.
a If the auto-deceleration is turned ON, large
monitor (a) and auto-deceleration monitor (b)
are displayed simultaneously.
a If the auto-deceleration is turned OFF, auto-
deceleration monitor (b) goes off.
30 Testing and adjusting
PC138US, USLC-8