Komatsu Galeo PC138US-8 Shop Manual page 903

50 Disassembly and assembly
13. Removal of operator cab mounting bolts and
nuts.
1) Remove 6 mounting bolts (22b) (marked
with *) and 4 nuts (22n) (marked with #)
from inside the operator cab.
a Nuts
(22n)
together.
2) Remove L.H. side cover (23).
3) Remove lock plate mounting bolt (24) and
remove plate (25).
4) Remove cab tip-over stopper mounting
bolt (26).
PC138US, USLC-8
tightens floor frame
14. Lift and remove operator cab assembly (27).
a Before removing the operator cap assem-
bly, make sure that all wiring and piping
are disconnected.
4
Operator cab assembly: 380 kg
Installation
Carry out the installation in the reverse order of
q
removal.
SEN02715-00
3