Komatsu Galeo PC138US-8 Shop Manual page 420

SEN02459-00
Default (Unit)
Check or change various settings related to the
machine monitor and machine by "Default".
The unit selecting function is used to select the unit
of the data displayed for monitoring, etc.
1. Selecting menu
Select "Default" on the "Service Menu" screen.
2. Selecting sub menu
After the "Default" screen is displayed, select
"Unit" with the function switches or numeral
input switches.
a Select this item similarly to an item on the
"Service Menu" screen.
3. Selecting unit
After the "Unit" screen is displayed, select the
unit to be set with the function switches.
[F3]: Move to lower unit
q
[F4]: Move to upper unit
q
[F5]: Cancel selection and return to
q
"Default" screen
[F6]: Confirm selection and return to
q
"Default" screen
38
30 Testing and adjusting
a When the machine is delivered, the SI unit
system is set.
PC138US, USLC-8