Komatsu Galeo PC138US-8 Shop Manual page 304

SEN02553-01
Operator mode function
The functions in this mode are displayed in normal operation. Display and setting of these functions are
q
available from the operator's switch operations.
Display and setting of some functions require special operation of the switch.
Items available in the operator mode are as follows:
q
Category
(*1)
Display of KOMATSU logo
Display of inputting password
Display of start-up check
Display of warning after start-up check
A
Display of overdue maintenance
Display of check of working mode and travel speed
Display of normal operation screen
Display of end screen
Selection of auto-decelerator
Selection of working mode
Selection of travel speed
Operation to stop alarm buzzer
Operation of windshield wiper
Operation of windshield washer
Operation of air conditioner
Operation to display camera mode
B
Operation to display clock/service meter
Check of maintenance information
Setting and display of user mode
• Breaker/attachment setting
• Display of message (including KOMTRAX messages for user)
• Screen adjustment
• Clock adjustment
• Language setting
• Economy mode adjustment
Display of energy-saving guidance
C Display of caution monitor
Display of user code and failure code
Function of checking display of LCD (Liquid Crystal Display)
D Function of checking service meter
Function of changing attachment/maintenance password
*1: The items available in the operator mode fall into the following categories.
A: Display from the time starting switch is turned "ON" until the ordinary screen appears. Display after
the starting switch is turned "OFF".
B: Display when the switch of machine monitor is operated.
C: Display when a certain condition is satisfied
D: Display when special switch operation is necessary.
*2: For the category A, the order in which items are displayed varies depending on the setting and condi-
tions of the machine as follows:
W: When the engine start lock is set on
X: When the engine start lock is set off
Y: When an error is detected during start-up check.
Z: When a maintenance overdue is detected.
a For how to operate the operator mode functions, see the Operation and Maintenance Manual or "Spe-
cial functions of machine monitor" in Testing and adjusting.
a For how to set the engine start lock on/off, see "Password setting/cancel manual".
46
10 Structure, function and maintenance standard
Item
Display order (*2)
W X Y Z
1 1 1 1
2 — — —
3 2 2 2
— — 3 —
— — — 3
4 3 4 4
5 4 5 5
PC138US, USLC-8