Komatsu Galeo PC138US-8 Shop Manual page 298

SEN02553-01
No. Classification Display item
10 Preheat
Auto-decelera-
11
Pilot
12 Working mode
13 Travel speed
(*2)
14
Engine oil level
(*2)
15 Engine oil
pressure
(*2)
16
Caution
Battery level
Maintenance
17
interval
*2: Included in the star-up check. After the staring switch is turned "ON", the monitor turns ON for 2 sec-
onds, and changes to a normal operation screen if no error is found.
40
Description
Elapsed time after turning
the starting switch to
"HEAT (preheat)".
0 – 30 sec.
30 – 40 sec.
40 sec. or more
Light ON: ON
tor Light OFF: OFF
P: Heavy-duty operation
E: Low-fuel consumption operation
L: Fine operation
B: Breaker operation
ATT: Compound attachment operation
Lo: Low speed
Hi: High speed
Light ON: Abnormal range (below the
specified value)
Light OFF: Normal range
Light ON: Abnormal range (below the
specified value)
Light OFF: Normal range
Light ON: Defective battery charge
(Charge voltage < Battery voltage)
Light OFF: Normal range
Background
color
There is a maintenance
item which is 30 hours or
Yellow
less left before next main-
tenance.
There is a maintenance
Red
overdue item.
10 Structure, function and maintenance standard
Monitor dis-
play
• Indicates preheat operating status.
ON
Blink
OFF
• Indicates auto-decelerator operating
status.
• Displays working mode.
• Displays travel speed setting.
• When an error is detected with the
engine running, the monitor lights up on
the screen and the alarm buzzer
sounds at the same time.
• When an error is detected with the
engine stopped, the monitor lights up
on the screen.
• When an error is detected with the
engine running, the monitor lights up on
the screen.
Status
• The display changes depending on the
time to/after the maintenance.
• After the starting switch is turned "ON",
the monitor turns ON if the monitor
light-up conditions are met, and then
turns OFF in 30 seconds.
Remarks
PC138US, USLC-8