Komatsu Galeo PC138US-8 Shop Manual page 415

30 Testing and adjusting
Maintenance Record
The machine monitor records the maintenance
information of the filters, oils, etc., which the opera-
tor can display and check by the following opera-
tions. When maintenance is carried out, if the data
are reset in the operator mode, the number of the
times of maintenance is recorded in this section.
1. Selecting menu
Select "Maintenance Record" on the "Service
Menu" screen.
2. Selecting maintenance record item
After the "Maintenance Record" screen is dis-
played, select an item to be checked with the
function switches or numeral input switches.
[F1]: Move to next page (screen)
q
[F2]: Move to previous page (screen)
q
[F3]: Move to lower item
q
[F4]: Move to upper item
q
[F5]: Return to service menu screen
q
a You may enter a 2-digit code with the
numeral input switches to select the item
of that code.
PC138US, USLC-8
a The following items can be selected in the
maintenance record.
01 Engine oil change
02 Engine oil filter change
03 Fuel main filter change
41 Fuel pre-filter change
04 Hydraulic oil filter change
05 Hydraulic tank breather change
06 Corrosion resistor change
07 Damper case service
08 Final drive case oil change
09 Machinery case oil change
10 Hydraulic oil change
3. Items displayed on maintenance record screen
The following items are displayed.
(a) : Maintenance items
(b) : Number of times of replacement up to now
(c) : Service meter reading (SMR) at previous
replacement
SEN02459-00
33