Komatsu Galeo PC138US-8 Shop Manual page 435

30 Testing and adjusting
Display of KOMTRAX message
Special messages for the serviceman sent from the
KOMTRAX base station (a distributor, etc.) can be
checked with this function.
If there is setting in a message, a return mail can be
sent by using numeral input switches.
1. Operation to display menu
Select "Service message" on the service menu
screen.
2. Display of message (Read-only)
If there is a message, its contents are dis-
played. If there is not a message, "No mes-
sage" is displayed.
[F5]: Return to service menu screen
q
a This message is different from a message
transmitted to the operator in the operator
mode.
a Since this message is special for the ser-
viceman, the message monitor is not dis-
played when it is received as in the
operator mode.
PC138US, USLC-8
3. Display of message (with return mail function)
If a box to enter a value with the numeral keys
is displayed under the message, enter a
proper number with the numeral input switches
and function switches and confirm it, and the
information is returned to the KOMTRAX base
station.
[F5]: Return to service menu screen
q
[F6]: Confirm and return input value
q
a This message is different from a message
transmitted to the operator in the operator
mode.
a Since this message is special for the ser-
viceman, the message monitor is not dis-
played when it is received as in the
operator mode.
SEN02459-00
53