Procedure
3.3.3
Connecting the power supply
Stripping the cable
Basic Panels
Operating Instructions, 04/2012, A5E02421799-03
Mounting and connecting
3.3 Connecting the HMI device
1. Interconnect functional ground of the
HMI device with an grounding cable,
cross-section 4 mm
.
2
2. Connect the grounding cable of the
HMI device to the equipotential
bonding rail.
Use power supply cables with a
maximum cross-section of 1.5 mm
1. Strip the ends of two power supply
cables to a length of 6 mm.
2. Attach cable sleeves to the bare
cable ends.
3. Fix the cable sleeve onto the cable
ends using the crimp pliers.
.
2
39