Time Changes; Keypad Input - DMP Electronics CellCom-LTE-V SERIES Installation And Programming Manual

10.8
TIME CHG NO
HRS FROM GMT:
GMT City/Time Zone
0 London, Monrovia, Lisbon
1 Cape Verde Island, Azores
2 Mid-Atlantic
3 Buenos Aires, Georgetown
4 Atlantic Time (Canada), Caracas
5 Eastern Time (US, Canada) Bogota
6 Central Time (US, Canada) Saskatchewan
7 Mountain Time (US, Canada), Edmonton
8 Pacific Time (US, Canada), Tijuana
9 Alaska
10 Hawaii
11 Midway Island, Samoa
10.9
KYPD INPUT
NONE ECP
CellCom -LTE-V Series Installation and Programming Guide

Time Changes

YES
This option allows the communicator to request automatic time changes from the DMP
SCS-1R or SCS-VR Receiver. For the receiver to send time changes, it must be
programmed to send time changes and must be receiving time change updates from the
host automation computer at least every 24 hours. (Default is YES)
6
When time zone is programmed YES, enter the number (0-23) that indicates the
Greenwich Mean Time zone (GMT) where the communicator is located. (Default is 6)
See table below for GMT values.
Table 6: GMT Time Zones

Keypad Input

This option allows the CellCom-LTE-V to communicate with Ademco/Honeywell panels
over the Ademco/Honeywell ECP Bus using the +Z4- terminals.
This allows the communicator to add, delete, and change user codes, arm and disarm
the Ademco/Honeywell panel, and forward alarm messages from the Ademco/Honeywell
panel to the Central Station.
Select ECP to enable communication. When NONE is selected, zone 4 functions as
normally programmed. (Default is NONE)
See Ademco/Honeywell ECP Connection, Table 3 and Figure 8 in applications for an
example of panel wiring and necessary Ademco/Honeywell panel programming.
SYSTEM OPTIONS
GMT City/Time Zone
12 Fiji, Marshall Island, Wellington
13 New Cadelonia
14 Guam, Sydney
15 Tokyo, Seoul
16 Hong Kong, Singapore
17 Bangkok, Hanoi
18 Dhaka, Almaty
19 Islamabad, Karachi
20 Abu Dhabi, Kazan
21 Moscow, Bagdad
22 Eastern Europe
23 Rome, Paris, Berlin
Digital Monitoring Products
21