16.10 Edit Devices In Favorites; 16.11 Remove Devices From Favorites; Transfer Controller (Xfer) - DMP Electronics CellCom-LTE-V SERIES Installation And Programming Manual

Z-WAVE SETUP
10. Press any Select key and the keypad displays FAN SETTING:.
11. Press any Select key and ON AUTO displays. Press the Select key under the desired new setting to change.
12. The Favorite name and the next Z-Wave device stored in the system displays.
Note: A maximum of 25 devices can be assigned to each Favorite. When attempting to add a device and the
maximum number of devices has been assigned, FAVORITE FULL is displayed. No additional Z-Wave devices may
be added to this Favorite, however a new Favorite may be created and devices added to the new Favorite.

16.10 EDIT Devices in FAVORITES

1. Access the User Menu.
2. Press CMD until ZWAVE SETUP? displays.
3. Press any Select key. The keypad displays ADD LIST REMOVE.
4. Press CMD again to display FAV XFER OPT. Select FAV and FAVORITE NUMBER: - is displayed.
5. Enter a Favorite number between 1 and 20 and press CMD.
6. The Favorite number and name displays. Press CMD and the Favorite Name and ADD EDIT REMOVE displays.
7. Select EDIT and the first Z-Wave device stored in the Favorite displays. Remaining devices can be viewed
by pressing the CMD key. Z-Wave devices are displayed by device type; Lights first, followed by Doors,
and Thermostats last. By pressing the CMD key you can scroll through the devices assigned to the selected
Favorite.
8. Press any Select key to display the device name and the setting for the device.
9. To change the setting, See Device Settings in Favorites.
10. Once the device settings have been entered, the Favorite name and the next Z-Wave device stored in the
selected Favorite displays.

16.11 REMOVE Devices from FAVORITES

1. Access the User Menu.
2. Press CMD until ZWAVE SETUP? displays.
3. Press any Select key. The keypad displays ADD LIST REMOVE.
4. Press CMD again to display FAV XFER OPT. Select FAV and FAVORITE NUMBER: - is displayed.
5. Enter a Favorite number between 1 and 20, press CMD.
6. The Favorite number and name displays. Press CMD and the Favorite Name and ADD EDIT REMOVE displays.
7. Select REMOVE and the first Z-Wave device stored in the Favorite displays. Remaining devices can be viewed
by pressing the CMD key.
8. Press any Select key to remove the device from the Favorite. REMOVE DEVICE FROM FAV? NO YES displays.
When YES is selected, the device is removed from the Favorite.

16.12 Transfer Controller (XFER)

This option allows the transfer of all existing Z-Wave devices that are currently programmed in another
manufacturer's Z-Wave portable controller to your system. This operation will overwrite all Z-Wave devices
that are programmed in your system. This option typically occurs at the time your DMP Z-Wave controller
is installed. Initiate the transfer at the other manufacturer's Z-Wave portable controller after starting the
transfer on the DMP keypad. Z-Wave devices are NOT overwritten until the transfer has been initiated at the
other manufacturer's Z-Wave portable controller. The transfer should not be stopped once the process has been
initiated from the other manufacturer's Z-Wave portable controller.
Transfer Operation:
1. Access the User Menu.
2. Press CMD until ZWAVE SETUP? displays.
3. Press any Select key. The keypad displays
ADD LIST REMOVE.
4. Press CMD again to display FAV XFER OPT. Select XFER. The keypad displays XFER WILL DELETE EXISTING
DEVICES then displays XFER CNTRL SURE? YES NO.
Digital Monitoring Products
32
CellCom- LTE-V Series Installation and Programming Guide