Basic Operation; I Monitor Function - Icom IC-V8000 Instruction Manual

I Receiving
q Push [PWR] for 1 sec. to turn power ON.
w Set the audio level.
➥ Push [MONI(ANM)] to open the squelch.
➥ Rotate the [VOL] control to adjust the audio output level.
➥ Push [MONI(ANM)] again to close the squelch.
e Set the squelch level.
➥ Rotate [SQL] fully counterclockwise in advance.
➥ Rotate [SQL] clockwise until the noise just disappears.
➥ When interference is received, rotate [SQL] clockwise
again for attenuator operation.
r Set the operating frequency. (pgs. 00, 00)
t When receiving a signal on the set frequency, squelch
opens and the transceiver emits audio.
Appears when receiving a signal.
✔ CONVENIENT!
The squelch level can also be adjusted with
SQLY
[ D(MUTE)] and [
Y
SQL
D
crophone.
SQLZ
#
• "BUSY" appears and the S/RF
indicator shows the relative
signal strength for the re-
ceived signal.
#(16KEY-L)] on the mi-
Z
SQL

BASIC OPERATION

I Monitor function

This function is used to listen to weak signals without disturb-
ing the squelch setting or to open the squelch manually even
when mute functions such as the tone squelch are in use.
Push [MONI(ANM)]
➥ Push [
1] to open the squelch.
MONI
MONI • Push [ 1] again to cancel the function.
MONI
1
4
➥ Push [MONI(ANM)] to open
the squelch.
• "BUSY" flashes
• Push [MONI(ANM)] again to
cancel the function.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
16