Icom IC-V8000 Instruction Manual page 37

I Transferring bank contnts
For erasing contents from bank or transferring contents to an
another bank, bank contents transfer is available.
q Select the desired bank contents to be transferred or
erased.
➥ Push [MR/CALL] to select memory mode.
➥ Push [BANK(OPT)] then rotate the tuning dial to select
the desired memory bank.
• "M" and bank initial blink.
➥ Push [BANK(OPT)] to select the bank then rotate the
tuning dial to select the desired contents.
• "M" and bank initial blinking stop.
w Push [MW(S.MW)] momentarily.
• "M" and bank initial blink.
BANK
OPT
e Rotate the tuning dial to select the desired bank initial to
transfer or erase.
• Select "– –" indication when erasing the contents from the bank.
r Push [MW(S.MW)] again.
• "M" and bank initial or "– –" indication blinking stop.
t Push [BANK(OPT)] twice to return to regular memory con-
dition.
y Repeat steps q to t to transferring or erasing an another
bank contents.
BANK/OPTION
[Y]/[Z]
Blinks
MEMORY OPERATION
z Select the desired bank contents.
➥ Push [MR/CALL] to select memory
mode.
➥ Push [BANK/OPTION] then select the
MW
desired memory bank via [Y]/[Z].
➥ Push [BANK/OPTION] to select the
bank then select the desired contents
via [Y]/[Z].
x Push [FUNC] then [
• "M" and bank initial blinks.
c Push [Y]/[Z] to select the desired bank ini-
tial to transfer or erase.
• Select "– –" indication when erasing the con-
tents from the bank.
v Push [
A(MW)].
CLR
• "M" and bank initial or "– –" indication blinking
stop.
b Push [BANK/OPTION] twice to return to
regular memory condition.
n Repeat steps z to b to transferring or
erasing an another bank contents.
6
1
2
3
4
5
6
7
8
9
10
11
A(MW)].
CLR
12
13
14
15
16
17
18
19
20
21
34