Icom IC-V8000 Instruction Manual page 7

y S/RF INDICATORS
➥ Show the relative signal strength while receiving sig-
nals. (p. 00)
➥ Show the output power level while transmitting. (p. 00)
u SKIP INDICATOR (p. 00)
Appears when the displayed memory channel is specified
as a skip channel.
i MEMORY INDICATOR (p. 00)
Appears when memory mode is selected.
o MEMORY CHANNEL NUMBER INDICATORS
➥ Shows the selected memory channel number. (p. 00)
➥ "C" appears when the call channel is selected. (p. 00)
!0 PRIORITY WATCH INDICATOR (p. 00)
Appears while the priority watch is activated; flashes while
the watch is paused.
!1 LOCK INDICATOR (p. 00)
Appears when the lock function is activated.
!2 TONE INDICATORS
➥ " " appears while the subaudible tone encoder is in
use. (p. 00)
➥ " " appears while the tone
in use. (p. 00)
➥ "D " appears while the tone
use. (p. 00)
➥ " " appears with the " " or "D " indicator while the
pocket beep function
(CTCSS or DTCS)
squelch function is
(CTCSS)
squelch function is in
(DTCS)
is in use. (p. 00)
PANEL DESCRIPTION
!3 DUPLEX INDICATORS (p. 00)
"+" appears when positive duplex, "–" appears when neg-
ative duplex operation is selected.
!4 AUTO POWER-OFF INDICATOR (p. 00)
Appears while the auto power-off function is in use.
!5 NARROW MODE INDICATOR (p. 00)
Appears when the narrow mode is selected.
*The narrow mode is available with some version
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
4