Icom IC-V8000 Instruction Manual page 9

I Microphone (HM-133V*)
q
w
e
r
t
*A different microphone
may be supplied de-
pending on version.
q VFO/LOCK SWITCH [VFO/LOCK]
➥ Push to select VFO mode. (p. 00)
➥ Push for 1 sec. to switch the lock function ON and OFF.
(p. 00)
w PTT SWITCH
➥ Push and hold to transmit; release to receive.
➥ Switches between transmitting and receiving while the
one-touch PTT function is in use. (p. 00)
e UP/DOWN SWITCHES [Y]/[Z]
➥ Push either switch to change memory channel, call
channel, set mode contents, etc. (pgs. 00, 00)
➥ Push either switch for 1 sec. to start scanning. (p. 00)
r ACTIVITY INDICATOR
➥ Lights red while any key, except [FUNC] and [DTMF-S],
!1
is pushed, or while transmitting.
!0 ➥ Lights green while the one-touch PTT function is in use.
o
t KEYPAD (p. 00)
i
y FUNCTION INDICATOR
u
➥ Lights orange while [FUNC] is activated—indicates the
y
secondary function of switches can be accessed.
Mic element
➥ Lights green when [DTMF-S] is activated—DTMF sig-
nals can be transmitted with the keypad.
u FUNCTION SWITCH [FUNC] (p. 00)
i DTMF MEMORY SELECT SWITCH [DTMF-S] (p. 00)
o FUNCTION SWITCHES [F-1]/[F-2] (p. 00)
Assign your desired key function from the front panel
switches.
• Default settings are [LOW(DUP)] for [F-1] and [TONE(T-SCAN)]
for [F-2] ([T-SCAN] when pushed and held).
!2 BANK/OPTION SWITCH [BANK/OPTION]
➥ Push to select memory bank. (p. 00)
➥ Push for 1 sec. to activate the installed optional unit.
(p. 00)
y MEMORY/CALL SWITCH [MR/CALL]
➥ Push to select memory mode. (p. 00)
➥ Push for 1 sec. to select call channel. (p. 00)
PANEL DESCRIPTION
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
6