I Using The Keypad - Icom IC-V8000 Instruction Manual

3
SETTING A FREQUENCY

I Using the keypad

The frequency can be directly set via numeral keys on the mi-
crophone.
z Push [VFO/LOCK] to VFO mode, if necessary.
ENT
x Push [
ENT
C
c Push 6 keys to input a frequency.
• When a digit is mistakenly input, push [
the input, then repeat input from the 1st digit.
• Pushing [
frequency.
[EXAMPLE]: Setting frequency to 145.3625 MHz.
Push
Push
Push
Push
13
C] to activate the keypad for digit input.
ENT
A] clears input digits and retrieves the
CLR
I Using the [Y]/[Z] keys
➥ Push [Y] or [Z] to select the desired frequency.
YZ • Pushing [Y] or [Z] for more than 0.5 sec. activates a
C] to clear
scan. If scan starts, push [Y] or [Z] again to cancel it.