D Frequency Range And Offset Direction - Icom IC-V8000 Instruction Manual

I Auto repeater
(USA version only)
The USA version automatically activates the repeater settings
(DUP– or DUP+ and tone encoder ON/OFF)
frequency falls within the general repeater output frequency
range and deactivates them when outside of the range.
D Setting the auto repeater function ON/OFF
q Push [PWR] to turn power OFF.
w While pushing [SET(LOCK)], turn power ON to enter initial
set mode.
While pushing [SET(LOCK)],
turn power ON.
e Push [SET(LOCK)] several times until the "RPT" display
appears as shown below.
INITIAL SET MODE
USING
when the operating
REPEATER OPERATION
r Rotate the tuning dial to turn the repeater lockout function
to "R1," "R2" or OFF.
Auto repeater function is
turned OFF.
• "R1": auto repeater is ON, tone encoder is OFF.
• "R2": auto repeater is ON, tone encoder is ON.
t Push [PWR] to exit initial set mode.

D Frequency range and offset direction

Frequency range
145.200–145.495 MHz
146.610–146.995 MHz
147.000–147.395 MHz
5
Auto repeater function is ON,
tone encoder is ON.
Duplex direction
"–" appears
"+" appears
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22