Repeater Operation; I Accessing A Repeater - Icom IC-V8000 Instruction Manual

5

REPEATER OPERATION

I Accessing a repeater

1
2
q Set the receive frequency
3
(pgs. 00–00)
w
Push [LOW(DUP)] for 1 sec., one or two times, to select
4
minus duplex or plus duplex.
5
6
7
8
9
Either "–" or "+" appears.
10
11
e Push [TONE(T-SCAN)] several times to turn ON the sub-
12
audible tone encoder, according to repeater requirements.
13
• " " appears
14
• 88.5 Hz is set to default; refer to p. 00 for tone frequency settings.
• When the repeater requires a different tone systems, see p. 00.
15
r Push and hold [PTT] to transmit.
16
• The displayed frequency automatically changes to the transmit
frequency (repeater input frequency).
17
• If "OFF" appears, confirm that the offset frequency (p. 00) is set
18
correctly.
19 t Release [PTT] to receive.
yPush [MONI(ANM)] to check weather the other station's
20
transmit signal can be received directly.
21
uTo return to simplex operation, push [LOW(DUP)] for
1 sec., once or twice, to clear the "–" or "+" indicator.
19
.
(repeater output frequency)
• "–" or "+" appears to indicate
the transmit frequency for
minus shift or plus shift, re-
spectively.
• When the auto repeater func-
tion is turned ON (available for
the USA version only), steps
w and e are not necessary.
(p. 00)
iTo turn OFF the subaudible tone encoder, push [TONE(T-
SCAN)] several times until no tone indicators appear.
z Set the receive frequency (repeater output fre-
DUP–
quency). (pgs. 00–00)
7
x Push [
– 7] to select minus duplex; push
DUP
[ + 8] to select plus duplex.
DUP
DUP+
c Push [FUNC] then [
8
the subaudible tone encoder according to re-
peater requirements.
• Refer to p. 00 for the tone setting.
• When the repeater requires a different tone system,
see p. 00.
v Push and hold [PTT] to transmit.
b Release [PTT] to receive.
n Push [
1] to check weather the other sta-
MONI
tion's transmit signal can be received directly.
m To return to simplex operation, push [
SIMP
, To turn OFF the subaudible tone encoder, push
9
[FUNC] then [
ENT
– 7(TONE)] to turn ON
DUP
9].
SIMP
C(T-OFF)].