I Lock Functions - Icom IC-V8000 Instruction Manual

3
SETTING A FREQUENCY

I Lock functions

To prevent accidental channel changes and unnecessary
function access, use the lock function. The transceiver has 2
different lock functions.
D Frequency lock
This function locks the tuning dial and switches electronically
and can be used together with the microphone lock function.
Push [SET(LOCK)] for 1 sec.
Appears
➥ Push [VFO/LOCK] for 1 sec. to switch the
VFO/LOCK lock function ON and OFF.
15
➥ Push
[SET(LOCK)] for
1 sec. to turn the lock func-
tion ON and OFF.
• [PTT], [MONI(ANM)], [VOL]
and [SQL] can be used while
the channel lock function is in
use. Also, TONE-1, TONE-2,
DTMF tones or DTMF mem-
ory contents can be transmit-
ted from the microphone.
D Microphone keypad lock
This function locks the microphone keypad.
➥ Push [FUNC] then [
16KEY-L switch the microphone keypad lock function
ON and OFF.
• [PTT], [VFO/LOCK], [MR/CALL], [BANK/OPTION],
[Y], [Z], [F-1], [F-2], [DTMF-S] and [FUNC] on the
microphone can be used.
• All switches on the transceiver can be used.
• The keypad lock function is released when the
power is turned OFF then ON again.
D(16KEY-L)] to
Z
SQL