Embedded Device Information - NEC Express5800/R120h-2M Maintenance Manual

Chapter 2 Useful Features
1.2.4

Embedded Device Information

(1)
(Embedded RAID) Menu
When you select System Configuration > (Embedded RAID) from the SystemManager, the (Embedded
RAID) menu appears.
For details about the options, see the table below.
Option
Controller Information
Enable/Disable Smart array
Debug Messages
Configure Controller Settings
Array Configuration
Disk Utilities
Exit and launch Smart
Storage Administrator(SSA)
(2)
(Embedded LOM) Menu
When you select System Configuration > (Embedded LOM) from the SystemManager, the (Embedded LOM)
menu appears.
For details about the options, see the table below.
Option
Firmware Image Menu
Disable HP Shared Memory
features
Blink LEDs
Pre-boot Wake On LAN
Chip Type
PCI Device ID
Bus:Device:Function
Link Status
Permanent MAC Address
Vitual MAC Address
126
Parameter
-
(Check Box)
-
-
-
-
Parameter
-
Disabled
[Enabled]
[0]-X
Disabled
[Enabled]
(Display only)
(Display only)
(Display only)
(Display only)
(Display only)
(Display only)
Express5800/R120h-1M, R120h-2M Maintenance Guide
Description
Provides the information of the controller like PCI
Bus :Device:Function, Firmware Revision, UEFI
Driver Version, Controller Temperature etc.
Select or deselect the check box to enable or
disable the Smart array debug message.
Configures the supported controller settings,
advanced controller settings(if applicable) and
clear the controller's current configuration.
Creates new array(s) from the list of drives
available and manages the existing arrays.
Displays the list of drives that are connected to
the controller and allows the user to perform
certain operations on the disks available.
Launch the Smart Storage Administrator (SSA) to
configure RAID levels.
Description
Firmware image information.
Disable usage of reserved memory regions to
allow direct assignment of device to guest virtual
machines.
Blink LEDs for a duration up to 15 seconds.(def:0)
Configure Pre-boot Wake on LAN (WOL).
Shows the type and revision number of the chip.
Shows the PCI device ID.
Shows the "PCI_bus_number:device_
number:function_number" of this device.
Shows the link status.
Shows the fixed MAC address.
Shows the virtual MAC address.
[ ]: Default setting
1. System Utilities