NEC Express5800/R120h-2M Maintenance Manual page 219

Nec express server. express5800 series
Hide thumbs Also See for Express5800/R120h-2M:
Table of Contents

Advertisement

Chapter 3 Appendix
q57nd60a
4
When installing an OS, starting system,
or applying Standard Program Package
q57nd60a
4
When installing an OS, starting system,
or applying Standard Program Package
b57nd60a
4
When installing an OS
ixgbs
27
When installing an OS, starting system,
or applying Standard Program Package
ixgbs
27
When installing an OS, starting system,
or applying Standard Program Package
i40ea
27
When installing an OS, starting system,
or applying Standard Program Package
i40ea
27
When installing an OS, starting system,
or applying Standard Program Package
i40ea
27
When installing an OS, starting system,
or applying Standard Program Package
volmgr
46
When installing an OS
Microsoft-Windows-T
ime-Service
134
When installing an OS, starting system,
or applying Starter Pack
HPE Ethernet 1Gb 4-port 331FLR Adapter #xx: The network link is
Warning
down. Check to make sure the network cable is properly connected.
This event does not affect system operation.
HPE Ethernet 1Gb 2-port 332T Adapter #xx: The network link is down.
Warning
Check to make sure the network cable is properly connected.
This event does not affect system operation.
Broadcom NetXtreme Gigabit Ethernet #xx: The network link is down.
Warning
Check to make sure the network cable is properly connected.
This event does not affect system operation.
HPE Ethernet 10Gb 2-port 562FLR-T Adapter #xx
Warning
The network link has been cut off.
This event does not affect system operation.
HPE Ethernet 10Gb 2-port 562T Adapter #xx
Warning
Network link is disconnected.
This event does not affect system operation.
HPE Ethernet 10Gb 2-port 562SFP+ Adapter #xx
Warning
Network link is disconnected.
This event does not affect system operation.
HPE Ethernet 10Gb 562SFP+ Adapter #xx
Warning
Network link is disconnected.
This event does not affect system operation.
HP Ethernet 10Gb 2-port 562FLR-SFP+ Adapter
Warning
Network link is disconnected.
This event does not affect system operation.
Error
Crash dump initialization failed!
Go to the following Microsoft website for details.
http://support.microsoft.com/kb/2756313
NtpClient was unable to set a manual peer to use as a time source
Warning
because of a DNS resolution error on 'time.windows.com,0x9'. NtpClient
will try again in 15 minutes and double the reattempt interval thereafter.
If it is not registered after connecting to the Internet, there is no problem
with system operation.
Express5800/R120h-1M, R120h-2M Maintenance Guide
2. List of Windows Event Logs
219

Advertisement

Table of Contents
loading

This manual is also suitable for:

Express5800/r120h-1mExp810Exp807

Table of Contents