NEC Express5800/R120h-2M Maintenance Manual page 118

Chapter 2 Useful Features
(b) Advanced Service Options Menu
When you select System Configuration > BIOS/Platform Configuration (RBSU) > Advanced Options >
Advanced Service Options from the System Utilities, the Advanced Service Options menu appears.
For details about the options, see the table below.
Option
Serial Number
Product ID
(c) Advanced Debug Options Menu
When you select System Configuration > BIOS/Platform Configuration (RBSU) > Advanced Options >
Advanced Debug Options from the System Utilities, the Advanced Debug Options menu appears.
For details about the options, see the table below.
Option
UEFI Serial Debug
Message Level
POST Verbose Boot
Progress
(d) Advanced Security Options Menu
When you select System Configuration > BIOS/Platform Configuration (RBSU) > Advanced Options >
Advanced Security Options from the System Utilities, the Advanced Security Options menu appears.
For details about the options, see the table below.
Option
TPM FIPS Mode Switch
118

Tips "Fan Failure Policy" is factory set to "Allow Operation with Critical Fan
Failures."

If NEC ESMPRO ServerAgentService is installed, set "Thermal Shutdown" to
"Disabled" because shutdown at high temperature is executed by NEC
ESMPRO ServerAgentService.
Parameter
String of up to 16 alphanumeric
characters
String of up to 16 alphanumeric
characters
Parameter
[Disabled]
Errors Only
Medium
Network
Verbose
Custom
[Disabled]
Serial Only
All
Parameter
[No Action]
Regular mode
FIPS mode
Express5800/R120h-1M, R120h-2M Maintenance Guide
Description
Use this option to set the system serial number. This
value must always match the serial number sticker
located on the chassis.
Leave all the options unchanged unless otherwise
specified.
Use this option to set the system Part Number. This
value must always match the Part Number sticker
located on the chassis.
Leave all the options unchanged unless otherwise
specified.
[
Description
Use this option to enable the UEFI Serial Debug
output and verbosity level. Selecting Verbose can
impact server boot time significantly. This option is
only applicable in UEFI Mode.
Use this option to enable verbose boot progress
messaging. Because this option displays additional
debug information to the screen and serial console, it
might be helpful for determining why a server
became unresponsive during the boot process.
[
Description
Use this option to switch the TPM chip to FIPS mode,
regular mode.
[
1. System Utilities
]: Default setting
]: Default setting
]: Default setting