NEC Express5800/R120h-2M Maintenance Manual page 202

Chapter 3 Appendix
Class Error code
Unsupported DIMM Configuration
Detected - Installed DIMMs could not
UEFI 210 support the currently configured
interleave mode. (Major Code:%1,
Minor Code:%2).
Unsupported DIMM Configuration
Detected - Processor %1 DIMM %2.
UEFI 211
The DIMM does not support ECC.
(Major Code:%3, Minor Code:%4).
Processor UPI Initialization Error. A
processor UPI initialization error was
UEFI 212
detected. %1 (Major Code:%2, Minor
Code:%3).
Unsupported DIMM Configuration
Detected - Processor %1 DIMM %2.
UEFI 213 The DIMM has more ranks than is
supported by this system. (Major
Code:%3, Minor Code:%4).
Unsupported DIMM Configuration
Detected - Processor %1 DIMM %2.
UEFI 214 The DIMM requires a frequency not
supported by the system. (Major
Code:%3, Minor Code:%4).
DIMM Initialization Error -
Processor %1 DIMM %2. The identified
UEFI 215 processor and memory failed to
initialize properly. %3 (Major Code:%4,
Minor Code:%5).
DIMM Initialization Error. A fatal error
was detected while initializing
UEFI 216
memory. %1 (Major Code:%2, Minor
Code:%3).
DIMM Initialization Error -
Processor %1 DIMM %2. The identified
UEFI 217 processor and memory are operating at
an incorrect voltage. %3 (Major
Code:%4, Minor Code:%5).
Memory Configuration Error - One or
more of the installed processors has a
total amount of memory installed which
UEFI 219
exceeds the amount supported by that
processor. %1 (Major Code:%2, Minor
Code:%3).
KTI Initialization Error - A fatal KTI
initialization error has been
UEFI 220
detected. %1 (Major Code: %2, Minor
Code: %3).
202
Error message
Express5800/R120h-1M, R120h-2M Maintenance Guide
Action
For the details of the DIMM configuration required
to use the interleaved mode, refer to the User's
Guide.
If the problem persists, contact your sales
representative.
Remove the DIMM which was pointed out. For the
details of the DIMM configuration, refer to the
User's Guide.
If the problem persists, contact your sales
representative.
Contact your sales representative.
Contact your sales representative.
Contact your sales representative.
Contact your sales representative.
Contact your sales representative.
Contact your sales representative.
Contact your sales representative.
Contact your sales representative.
1. IML Error Message