NEC Express5800/R120h-2M Maintenance Manual page 180

Chapter 3 Appendix
(2) The list on the messages related to processor, UPI bus, and PCIe bus
Error
Class
code
CPU 3
Host Bus 3
PCI Bus 2
PCI Bus 3
PCI Bus 4
(3) The list on the messages related to POST
Class Error code
Option ROM Error. An option ROM for a
UEFI 101
PCIe device is invalid.
UEFI 104 ASR Timer Failure
A Critical Error occurred prior to this
UEFI 121
power-up.
DIMM Initialization Error - All DIMMs
are mapped out due to memory errors
except for one to allow the system to
UEFI 218
boot. Additional errors may be present
on the remaining DIMM. System is
booting in a degraded state.
UEFI 224 Power Fault Detected - FlexLOM %1
UEFI 225 Power Fault Detected-Mezzanine %1.
180
Error message
Uncorrectable Machine Check Exception
(Processor %2, APIC ID 0x%3, Bank
0x%4, Status 0x%5'%6, Address
0x%7'%8, Misc 0x%9'%10).
Uncorrectable UPI Error was detected on
Processor %1
Uncorrectable PCI Express Error Detected.
Slot %1 (Segment %2, Bus %3,
Device %4, Function %5). Uncorrectable
Error Status: %6
Uncorrectable PCI Express Error Detected.
Embedded %1 (Segment %2, Bus %3,
Device %4, Function %5). Uncorrectable
Error Status: %6
Uncorrectable PCI Express Error Detected.
Slot %1 (Segment %2, Bus %3,
Device %4, Function %5).
Error message
Express5800/R120h-1M, R120h-2M Maintenance Guide
Action
Contact your sales representative.
Contact your sales representative.
Contact your sales representative.
Contact your sales representative.
Contact your sales representative.
Action
Contact your sales representative.
Contact your sales representative.
Contact your sales representative.
Contact your sales representative.
Turn off the power on the unit, disconnect the
power cord, and check the installation of
FlexLOM %1. Wait 30 seconds, and then restart it.
If the problem persists, contact your sales
representative.
Turn off the power on the unit, disconnect the
power cord, and check the installation of
mezzanine %1. Wait 30 seconds, and then restart
it. If the problem persists, contact your sales
representative.
1. IML Error Message