Initialization Of System Configuration Information; Description On The Features Of System Maintenance Switch - NEC Express5800/R120h-2M Maintenance Manual

Chapter 1 Maintenance
7.3

Initialization of System Configuration Information

7.3.1

Description on the Features of System Maintenance Switch

Here we describe the features of system maintenance switch of the server.
Position Default
SW1 *1, *5 OFF
SW2 OFF
SW3 OFF
SW4 OFF
SW5 *2, 5 OFF
SW6 *3, *5 OFF
SW7 OFF
SW8 OFF
SW9 OFF
SW10 OFF
SW11 OFF
SW12 OFF
*1 Set SW1 to ON in the following cases.
・When the passwords of all the users which administrator authority is given of iLO5 have become unknown
・When you change the feature of iLO5 from disabled to enabled
*2 Regarding the operation procedure of SW5, see Chapter 2 (7.3.4 Clearing a Password) of this document.
*3 Regarding the operation procedure of SW6, see Chapter 2 (7.3.3 Set the System Configuration Back to
Default Values).
*4 Default values may be different from the factory preset.
*5 When you set SW1, SW5, and SW6 to ON at the same time, boot with the backup ROM.
60
Table: Detailed Features of System Maintenance Switch
Configuration
OFF Set to OFF usually.
ON Set the security of iLO5 to disabled.
Reserved
Reserved
Reserved
Set to OFF usually.
OFF
Clears power-on password and administrator password.
ON
OFF Set to OFF usually.
ON Set the system configuration back to the default values. *4
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Important
Do not change the system maintenance switch that says "Reserved" unless
it is instructed by the document. It may cause the trouble or malfunction of
device.
Express5800/R120h-1M, R120h-2M Maintenance Guide
7. Resetting and Clearing the Server
Features
－
－
－
－
－
－
－
－
－