Table of Contents
Advertisement
Chapter 1 Maintenance
6.2.3
Checking the device configuration information
Display the device configuration information screen before diagnosing the system.
The screen displays the information about the system processor, hard disk drive, removable media, PCI card
and the number of power units.
Check that the device configuration is correct and that there is no unrecognized device.
****************************************************
Please confirm the devices.
****************************************************
------------------------------
CPU Information
==============================
CPU : Genuine Intel(R) CPU @ 2.10GHz, 4(4)Cores
------------------------------
Memory Information
==============================
Memory RAS Mode
Memory Capacity
------------------------------
Option Board Information
==============================
SATA : LynxPoint 6-port SATA Controller 1 (AHCI mode)
:
:
:
Press enter key to continue.
6.2.4
System diagnosis
Decide whether or not to undertake system diagnostic evaluation.
Select "Execute" to execute system diagnosis. Then, move on to step 1.
Select "Cancel" to ignore system diagnosis. Then, move on to "Chapter 1 (6.2.5 Saving log)".
56
: Independent
: 8 GB
Device confoguration information screen
***********************************************
Are you sure you want to execute the test?
***********************************************
1: Execute
2: Cancel
Enter selection [Execute]:
System diagnostic execution screen
Scalable Modular Server DX2000 Maintenance Guide
6. System Diagnostic Tool
Advertisement
Table of Contents
