NEC Express5800/R120h-2M Maintenance Manual page 203

Chapter 3 Appendix
Class Error code
Unknown Initialization Error. The
system has experienced a fatal
UEFI 221
initialization error. %1 (Major
Code: %2, Minor Code: %3).
Unsupported DIMM Configuration
Detected - Processor %1 Channel %2.
UEFI 228 DIMM population rule violation. The
Memory channel has been mapped out.
(Major Code:%3, Minor Code:%4).
Unsupported DIMM Configuration
Detected - Processor %1 DIMM %2.
UEFI 229 The identified DIMM is not supported in
the system. (Major Code:%3, Minor
Code:%4).
Unsupported DIMM Configuration
Detected - Processor %1 Channel %2.
The number of installed DIMM ranks
UEFI 230
exceeds the number supported by the
channel. (Major Code:%3, Minor
Code:%4).
Memory Configuration Error - No
memory is available. If DIMMs are
UEFI 231 installed, verify that the corresponding
processor is installed. %1 (Major
Code:%2, Minor Code:%3).
DIMM Initialization Error - A memory
UEFI 232 initialization error was detected. %1
(Major Code:%2, Minor Code:%3).
DIMM Initialization Error -
Processor %1 Channel %2. The
UEFI 233 identified memory channel could not be
properly trained and has been mapped
out. (Major Code:%3, Minor Code:%4).
DIMM Initialization Error -
Processor %1 DIMM %2. The identified
UEFI 234 DIMM could not be properly trained and
has been mapped out. (Major
Code:%3, Minor Code:%4).
Unsupported DIMM Configuration
Detected - Mixed DIMM configurations
UEFI 235
are not support on this system. %1
(Major Code:%2, Minor Code:%3).
Error message
Express5800/R120h-1M, R120h-2M Maintenance Guide
Action
Contact your sales representative.
Check and change the DIMM configuration for the
rules of the installation. For the details of the DIMM
configuration, refer to the User's Guide.
If the problem persists, contact your sales
representative.
Remove the DIMM which was pointed out. For the
details of the DIMM configuration, refer to the
User's Guide. If the problem persists, contact your
sales representative.
Remove the DIMM of the memory channel which
was pointed out. For the details of the DIMM
configuration, refer to the User's Guide. If the
problem persists, contact your sales
representative.
Contact your sales representative.
Contact your sales representative.
Contact your sales representative.
Contact your sales representative.
Remove the DIMM which was pointed out. For the
details of the DIMM configuration, refer to the
User's Guide. If the problem persists, contact your
sales representative.
1. IML Error Message
203