NEC Express5800/R120h-2M Maintenance Manual page 89

Nec express server. express5800 series
Hide thumbs Also See for Express5800/R120h-2M:
Table of Contents

Advertisement

Chapter 2 Useful Features
Option
IPv4 Primary DNS
IPv4 Secondary DNS
IPv6 Config Policy
IPv6 Address
IPv6 Gateway
IPv6 Primary DNS
IPv6 Secondary DNS
Parameter
IP Address
IP Address
[Automatic]
Manual
IP Address
IP Address
IP Address
IP Address
Express5800/R120h-1M, R120h-2M Maintenance Guide
Description
Use this option to specify the pre-boot network
Primary DNS Server IPv4 address. Enter a static IP
address using dotted-decimal notation (for
example, 127.0.0.1). If DHCP is used (the DHCPv4
option is enabled), this setting is unavailable
because the value is supplied automatically.
Use this option to specify the pre-boot network
Secondary DNS Server IPv4 address. Enter a
static IP address using dotted-decimal notation (for
example, 127.0.0.1). If DHCP is used (the DHCPv4
option is enabled), this setting is unavailable
because the value is supplied automatically.
When set to Automatic, this option enables
obtaining the pre-boot network IPv6 configuration
automatically. Individual settings are not available.
When set to Manual, you must configure static IP
address settings individually.
Use this option to specify the pre-boot network IPv6
address. Enter a static IP address in the standard
colon separated format (for example, 1234::1000).
If IPv6 Config Policy is set to Automatic, this setting
is unavailable because the value is supplied
automatically.
Use this option to specify the pre-boot network
gateway IPv6 address. Enter a static IP address in
the standard colon separated format (for example,
1234::1000). If IPv6 Config Policy is set to
Automatic, this setting is unavailable because the
value is supplied automatically.
Use this option to specify the pre-boot network
Primary DNS Server IPv6 address. Enter a static IP
address in the standard colon separated format (for
example, 1234::1000). If IPv6 Config Policy is set to
Automatic, this setting is unavailable because the
value is supplied automatically.
Use this option to specify the pre-boot network
Secondary DNS Server IPv6 address. Enter a
static IP address in the standard colon separated
format (for example, 1234::1000). If IPv6 Config
Policy is set to Automatic, this setting is unavailable
because the value is supplied automatically.
1. System Utilities
89

Advertisement

Table of Contents
loading

This manual is also suitable for:

Express5800/r120h-1mExp810Exp807

Table of Contents