NEC Express5800/R120h-2M Maintenance Manual page 178

Chapter 3 Appendix
Error
Class
code
Environment 22 %1 Fan Inserted (Fan %2, Location %3, %4)
Environment 23 System Fans Not Redundant (Location %1)
External Chassis Fans Not Redundant
Environment 24
(Chassis %1, Location %2)
%1 Storage System Fans Not Redundant
Environment 25
(%2Slot %3, Location %4)
Environment 26 %1 Fans Not Redundant (Location %2, %3)
Environment 27 Critical Temperature Threshold Exceeded
Critical Temperature Threshold Exceeded
Environment 28 (Temperature Sensor %1, Location %2,
Temperature %3C %4)
External Chassis Overheating (Chassis %1,
Environment 29 Temperature Sensor %2, Location %3,
Temperature %4)
%1 Storage System Overheating (%2Slot %3,
Environment 2A Temperature Sensor %4, Location %5,
Temperature %6)
%1 Overheating (Temperature Sensor %2,
Environment 2B
Location %3, Temperature %4, %5)
Environment 2C Temperature exceeded on PCIe disk %1.
Environment 2D Intrusion Alert Hardware installed.
#ILO had detected the removal of the
Environment 2E
Intrusion Alert hardware.
178
Error message
Express5800/R120h-1M, R120h-2M Maintenance Guide
Action
Disposal is not necessary.
Contact your sales representative.
Contact your sales representative.
Contact your sales representative.
Contact your sales representative.
Check the ambient temperature where the
unit is being operated.
If the problem persists, contact your sales
representative.
Check the ambient temperature where the
unit is being operated.
If the problem persists, contact your sales
representative.
Check the ambient temperature where the
expansion chassis connected to the unit is
being operated.
If the problem persists, contact your sales
representative.
Check the ambient temperature where
the %1 connected to the unit is being
operated.
If the problem persists, contact your sales
representative.
Check the ambient temperature where
the %1 connected to the unit is being
operated.
If the problem persists, contact your sales
representative.
Contact your sales representative.
No additional action is required, if the
applicable HW has been added.
If the problem persists, contact your sales
representative.
No additional action is required, if the
applicable HW has been removed.
If the problem persists, contact your sales
representative.
1. IML Error Message