NEC Express5800/R120h-2M Maintenance Manual page 207

Chapter 3 Appendix
Class Error code
Uncorrectable Memory Error Threshold
Exceeded (%1 %2, DIMM %3). The
UEFI 462
DIMM is mapped out and is currently
not available.
IMPORTANT: The UEFI Variable space is
close to exceeding the non-volatile
UEFI 471 storage capacity. This may impact OS
installations and may limit the ability to
configure certain options.
MemBIST RMT: %1 margin out of range
UEFI 3010
at CPU %2 DIMM %3 - Count %4
MemBIST MEMTEST: UnCorrectable
UEFI 3011 Memory Error found at CPU %1
DIMM %2 Rank %3 - UC Count %4
MemBIST MEMTEST: Correctable
Memory Error found at CPU %1
UEFI 3012
DIMM %2 Rank %3 Strobe %4 - CE
Count %5
Processor Built-In Self-Test (BIST)
UEFI 3013 Failure. Processor %1, Error Code =
0x%2.
(4) The list of messages about the power supply
Error
Class
code
Power 15
Power 1B
Power 1C
Power 1E
Power 24
Power 28
Power 29
Power 2A
Power 2B
Power 2C
Error message
Error message
Mismatched Power Supply Installed
System Board Power Protection Fault
Power Supply or Power Backplane
Detection Error
Smart Storage Battery Removed
(Battery %1)
Power On Denied (Service
Information: %1)
System Power Supply: %1 (Power
Supply %2)
External Chassis Power Supply: %1
(Chassis %2, Power Supply %3)
%1 Storage System Power Supply: %2
(%3Slot %4, Power Supply %5)
%1 Power Supply: %2 (Power
Supply %3, %4)
System Power Supply Removed (Power
Supply %1)
Express5800/R120h-1M, R120h-2M Maintenance Guide
Action
Contact your sales representative.
Restore the factory default settings using the
"Restore Default Manufacturing Settings" option
via System Configuration > BIOS/Platform
Configuration (RBSU) > System Defult Options
in the system utility. If the problem persists,
contact your sales representative.
Contact your sales representative.
Contact your sales representative.
Contact your sales representative.
Contact your sales representative.
Action
Confirm the PSU mounted on the unit.
If the problem persists, contact your sales
representative.
Contact your sales representative.
Contact your sales representative.
Contact your sales representative.
Contact your sales representative.
Contact your sales representative.
Contact your sales representative.
Contact your sales representative.
Contact your sales representative.
Action is not necessary.
1. IML Error Message
207