Table of Contents
Advertisement
Chapter 1 Installing Windows
3.6
Setup of Device Drivers
Install and set up device drivers provided for the standard configuration of the server.
For details regarding the installation and setup of a driver for an optional device, refer to the manual supplied
with the optional device.
3.6.1 Installing the LAN drivers
(1)
LAN drivers
The drivers are installed by Standard Program Package.
(2)
Optional LAN board
This server supports the following optional LAN boards.
R120i-1M
R120i-2M
R120h-1M
R120h-1M (2nd-Gen)
R120h-2M
R120h-2M (2nd-Gen)
R120h-1M (3rd-Gen)
R120h-2M (3rd-Gen)
R120h-1E
R120h-2E
T120h
R110j-1
If you install the LAN boards after installing Standard Program Package, install Standard Program Package
again according to Chapter 1 (3.4 Standard Program Package Installation).
56
Important
Wake On LAN (WOL) is supported by standard network adapters and
N8104-171/172/173/175/193/194/195/206/207/208/213/217 only.
When using Wake On LAN see Chapter 1 (3.6.2 Setting up LAN drivers -
(3) Setting up Wake on LAN).
Note
To change the LAN driver settings, sign in to the system from a local console
using an administrator's account. Remotely changing the settings by using the
operating system's remote desktop feature is not supported.
Choose the Internet Protocol (TCP/IP) check box when specifying an IP
address.
N8104-206/207/208/209/210/211/212/217/219
N8104-171/172/173/175/176/177/178/179/180/181/182/183/184/185/186/187
N8104-172/175/178/179/180/181/182/183/184/185/186/187/213/215
N8104-171/172/173/175/176/177/178/179/180/181/182/183/184/185/186/187/
193/194/195
N8104-178/179/180/181/182/183/184/185/186/187
N8104-171/172/173/176/178/179/180/181/182/183/185/186
Installation Guide (Windows Server 2019)
3. Installing Windows Server 2019
Advertisement
Table of Contents
