Table of Contents
Advertisement
46
en | Installation options
If the HDD32.EXE installer is not run before the Security Escort software is run the first time,
the Security Escort software will stop with an error and HDD32.EXE will automatically run. A
non-network installation is complete at this point and you do not have to refer to the rest of
this document.
6.3
Network installations
The Security Escort software supports a single master computer, a single slave computer
(optional) and a maximum of eight workstations. The master computer normally processes the
real time communications to the SE coordinators and controls the system. The slave computer
can assume the master's role by switching the SE coordinator communications to the slave
computer.
This system redundancy feature is explained in further detail in the System redundancy
chapter.
The workstation computers allow other computers to respond to alarms, perform maintenance
and edit the databases.
6.4
Installing the Security Escort software
6.4.1
Software installation procedure
Typically, the Security Escort program is delivered on a CD-ROM.
Notice!
Exit all other programs before inserting the CD-ROM.
An "autorun" feature should automatically start the installation program. If not, run SETUP.EXE
using one of the following methods:
1.
2.
3.
Once SETUP.EXE is running, the following Welcome dialog appears.
2018.03 | SE3v1.0 | DOC
Double click the Computer icon on the desktop. Select the Compact Disc (X:), double-
click the INSTALLER directory. Double-click the SETUP.EXE icon. X is the letter of the CD-
ROM drive.
Go to Start > Programs > Windows Explorer. In Windows Explorer, select the Compact
Disc (X:) and double-click the INSTALLER directory. Double-click the SETUP.EXE icon.
Click Start > Run. Type "X:\INSTALLER\SETUP.EXE" in the Open textbox and click the
[OK] button. X is the drive letter for the CD-ROM drive.
Technical Reference Manual
Security Escort
Robert Bosch (SEA) Pte Ltd
Advertisement
Table of Contents
