Table of Contents
Advertisement
Security Escort
7
Central Console, computer setup and programming
7.1
Initial system configuration
The default password is PPP. The default password, the Master password, and passwords for
all system operators should be changed.
–
–
–
–
–
–
–
–
–
–
–
–
7.2
Remote comm port setup
This dialog connects the network, modem and system serial ports to the physical
communication ports on the computer and sets their baud rate.
Robert Bosch (SEA) Pte Ltd
To generate the map file for the screen display, refer to Image files, page 55.
To setup the system COMM ports refer to Remote comm port setup, page 57.
To set the function of the system COMM ports and setup remote access, see Remote
setup, page 59.
To program the system configuration, see Transponder database, page 62.
To program the system responses to an alarm, see System preferences, page 100.
To program the system responses to troubles, see Popup trouble filter, page 183.
If this system has master and slave computers, set the Default Master Computer and
Default Slave Computer. Refer to Remote setup, page 59.
If using pager access in this system, see Pager setup, page 208.
If this computer runs other programs at the same time, Security Escort is running, set the
Not Always Top Window field (see Security Preferences, page 106).
To program the ID receiver to automatically enter the transmitter IDs, see Security
Preferences, page 106.
To set the names of the subscriber classes, see System Default dialog in the Security
Escort Operations Guide.
To program the transmitters into the Subscriber Database, refer to the Security Escort
Operations Guide.
Technical Reference Manual
Central Console, computer setup and programming | en
57
2018.03 | SE3v1.0 | DOC
Advertisement
Table of Contents
